Why containers are stacked at all

Land in a port is expensive and short. A terminal cannot lay every container on the ground in a single layer, so it stacks them. A stack is a column of boxes, one on top of another. Stacks stand in rows, rows form bays, and bays form blocks. If you are new to the route a box takes, start with how a container moves through a port.

Stacking saves space. It also takes away access. You can only reach the box on top. Every yard plan is a trade between the two.

The words yard planners use

Block
A group of stacks served by the same yard cranes.
Bay, row, tier
The three coordinates of a slot. The bay runs along the block, the row runs across it, and the tier is the height.
Slot
One box position in a stack.
Ground slot
A slot on the ground, in tier one.
Dig, or reshuffle
A move of a box that is only done to reach another box below it.

What a dig really costs

Say you need the box at the bottom of a stack of three. The crane lifts the top box off and puts it somewhere else. It lifts the second box off and puts it somewhere else. Only then can it lift the one you need. That is two extra moves.

CUR-482 AUR-157 HCY-065 STACK 4B ISB-856 STACK 5B 1 2
To reach CUR-482 at the bottom, the crane moves HCY-065, then AUR-157. Two moves that do nothing for the ship.

Each extra move takes crane time. Crane time is limited. While a crane is busy digging, the truck below waits, and the ship may wait for the truck. One wrong stack can cost a full cycle, and several in a row can delay a sailing.

Where do the moved boxes go?

That is the hidden problem. Each dug box has to land in another stack. If you put it where it blocks another needed box, you have just moved the problem. Good planners think about where boxes go before they move them.

How planners keep digs low

  • Group by ship and port. Boxes for the same vessel are stacked together, so the crane works in one area.
  • Stack in reverse loading order. The box to be loaded last goes at the bottom, and the box to be loaded first goes on top. This is not always possible, because boxes arrive in whatever order the trucks come.
  • Leave stacks lower in busy blocks. Fewer tiers means fewer digs, at the cost of space.
  • Use the clock. Boxes that leave soon go on top. Boxes that will wait longer go underneath.

Planning software helps, but arrival times are never certain. Some digs always happen. The machines that do the stacking, RTGs, straddle carriers and ASCs, shape how high and how wide a yard can go.

Where reefers go in the yard

A reefer is a refrigerated container. It carries food, medicine or other goods that must stay cold. A reefer needs electricity to run its cooling unit.

In the yard, reefers stand in special racks or rows with power points. Terminal staff check each reefer's temperature at set intervals. Reefers cannot just go anywhere. They need a slot with a plug, and the slot count limits how many reefers a terminal can hold. If a reefer loses power, its cargo may spoil.

How hazardous boxes are kept apart

Dangerous goods are shipped in containers, too. Examples are flammable liquids, gases and corrosive chemicals. Each carries a hazard class, and international rules for sea transport set out which classes may not sit near each other.

In the yard, hazardous boxes go in designated areas. Boxes of incompatible classes are kept apart, with a gap or a barrier between them. The terminal marks the boxes with placards and can show where each one stands. This reduces the damage if one leaks or catches fire.

Why heavy boxes go low

A container's weight matters for two reasons. First, cranes and stacks have limits. Second, a ship must be balanced.

Before a box is loaded, its verified gross mass must be known, so the ship's loading plan is right. In the yard, the rule of thumb is simple: heavy boxes go low and light boxes go high. A heavy box on top of a light one can crush it, and a tall stack of heavy boxes can be unsafe. Planners group boxes in weight bands to make this easy to follow.

Where the empty containers go

Empty containers are light and are not valuable cargo, but they take space. Terminals keep them in a depot, often stacked higher than loaded boxes, because they are lighter. A special empty handler moves them. When a customer needs an empty box, any suitable empty will do, so empties rarely need digs.

A few rules of thumb

  1. Look at where a box is going, not only where it is now.
  2. Never block a box you will need soon.
  3. Put heavy boxes low.
  4. Keep hazards apart.
  5. Keep reefers on power.
  6. Think two moves ahead.

In the game

How it works in TermOps

Stacking is the heart of the game.

  • You can only lift the top box. If the box you need is buried, the game tells you which box to move first.
  • Reshuffles. A stack-to-stack move that digs out a wanted box costs nothing. A move that was not needed costs points.
  • Load lists. You must find the boxes on the ship's list. They are not always on top.
  • Reefers (from GdaƄsk) need power, and a cold bar shows how they are doing.
  • Hazardous boxes (from Hong Kong, level 7) go in hazard bays. The game refuses a wrong placement and tells you why. A halo shows the segregation.
  • Weight classes (W1 to W5, from Shanghai) apply. A heavy box on a light one costs points.
  • Empties are stacked in the depot by an empty handler, in the level where the depot appears (Melbourne).

The camera turns all the way round, and stacks turn see-through when they block your view. A stack inspector shows what is inside.

FAQ

What is a dig in a container yard?

A dig, or reshuffle, is a box move made only to reach a box underneath. It does not help the ship. It uses crane time and can delay trucks. Terminals plan stacks to avoid digs, but arrival order means some are unavoidable.

How high are containers stacked?

It depends on the terminal and the equipment. Straddle carrier yards stack lower than gantry crane yards, and empties are stacked higher than loaded boxes. Limits come from the crane's reach, the ground and safety rules.

Why are heavy containers put at the bottom?

Heavy boxes at the bottom keep the stack stable and avoid crushing lighter boxes below. The same logic applies on the ship, where low weight distribution keeps the vessel stable. Planners also need accurate weights to do this safely.

Try it. Dig out your first box in Training.

Play TermOps